Mixing Tanks & Vessel

What is the open mixing tank?
YX open mixing tank, also called open top mixing vessel, is a stainless steel mixer machine for the manufacture of low viscosity liquids and preparations in the cosmetics, pharmaceuticals, food and chemicals industries.

What is open mixing tank made of?
YX open mixing tank is usually made of mixing tank, heating and cooling system, temperature control system, electrical control panel etc.

The mixing tank is composed of an anchor agitator mounted from the top cover and two or more baffles attached to the inside wall.

How does open mixing tank work?
During the mixing operation, the anchor agitator rotates clockwise slowly driving the materials move along the wall. When the liquid meets the baffles, some change the moving direction and some pass the baffles from around.

The left part of the anchor mixer moves the liquid upwards and the right part moves it downwards. Because of the two opposite forces by the agitator, the liquid rolls over the vessel from top to bottom and back to top repeatedly. When the liquid is completely mixed and blended, the heat from the jacket is quickly transferred to every part through the inside wall.

What is the closed mixing vessel?
YX closed mixing vessel, also called mixing vessel, is a stainless steel mixer machines for the manufacture of low viscosity preparations and fluid in the cosmetics, pharmaceuticals, food and chemicals industries. It has very similar design as YX vacuum mixing tank except for the thickness of stainless steel and vacuum system.

What is closed mixing vessel made of?
YX closed mixing vessel is usually made of stainless steel mixer tank, heating and cooling system, temperature control system, electrical control panel etc.

The mixer tank is usually composed of an anchor agitator mounted from the top cover. Two or more baffles depending on the tank size are attached to the inside wall.

How does closed mixing vessel work?
During the mixing operation, the anchor agitator rotates clockwise slowly driving the materials move along the wall. When the liquid meets the baffles, some change the moving direction and some pass the baffles from around.

The left part of the anchor mixer moves the liquid upwards and the right part moves it downwards. Because of the two opposite forces by the agitator, the liquid rolls over the vessel from top to bottom and back to top repeatedly. When the liquid is completely mixed and blended, the heat from the jacket is quickly transferred to every part through the inside wall.

What is vacuum mixing tank?
YX vacuum mixing tank, also called mixing kettle, is a stainless steel mixer machine for the manufacture of low-viscosity preparations and fluid in the cosmetics, pharmaceuticals, food and chemicals industries. It has very similar design as YX closed mixing vessel except for the thickness of stainless steel and vacuum system.

What is vacuum mixing tank made of?
YX vacuum mixing tank is usually made of stainless steel mixer tank, vacuum system, heating and cooling system, temperature control system, electrical control panel etc.

The mixing tank is usually composed of an anchor agitator mounted from the top cover. Two or more baffles depending on the tank size are attached to the inside wall.

The vacuum system includes a water ring type vacuum pump, one water tank and one baffle filter tank.

How does vacuum mixing kettle work?
During the mixing operation, the anchor agitator rotates clockwise slowly driving the materials move along the wall. When the liquid meets the baffles, some change the moving direction and some pass the baffles from around.

The left part of the anchor mixer moves the liquid upwards and the right part moves it downwards. Because of the two opposite forces by the agitator, the liquid rolls over the vessel from top to bottom and back to top repeatedly. When the liquid is completely mixed and blended, the heat from the jacket is quickly transferred to every part through the inside wall.

Water ring type vacuum pump (–0.09Mpa) is powerful to pull out the bubbles generated during mixing and dissolving. It also helps transfer the ingredients from the oil and water phase tanks to the main emulsifying mixer. The small quantity powders are also sucked by vacuum to avoid dust.

What is horizontal ribbon blender?
LD horizontal ribbon blender, also called ribbon mixer, is a stainless steel mixer machine widely used for the manufacture of dry powder, granules and low-viscosity paste and liquid in chemicals, pharmaceuticals, food and cosmetics industries. It’s especially suitable for mixing solids with solids and solids with liquids.

What is horizontal ribbon blender made of?
LD horizontal ribbon blender is usually made of ribbon blender and electrical control panel etc.

The ribbon blender is composed of a U-shaped horizontal chamber and ribbon agitator inside. The ribbon agitator consists of one rotating shaft with two contra helical spirals.

How does horizontal ribbon mixer work?
During the mixing operation, the outer ribbon drives the powder from two ends to center of the drum. The inner ribbon moves the powder from center to two ends in opposite direction.

The above two types of contra forces repeat and repeat. And the powder circulates inside the chamber and is completely mixed and blended in a short time.

What is perfume mixer with integrated chiller?
XS perfume mixer with integrated chiller, also called perfume mixer machine, is a complete mixing, chilling and filtration system for the making of perfume, cologne, deodorant and toilet water in cosmetic industry. Unlike perfume mixer with separate chiller, it’s the most compact design for making perfume in one single unit and is widely accepted in cosmetic manufacturing factories around the world.

What is perfume mixer with integrated chiller made of?
XS perfume mixer machine is usually made of mixing tank, chilling system, filtration system, diaphragm pump and electric control panel etc.

The perfume mixer is a single jacketed tank with insulation which is used to keep the chilling away when the chiller is running. There’s a spiral evaporating coil inside the perfume mixer machine. The evaporating coil is connected to the chiller with refrigerant inside.

We usually use Copeland or Danfoss comperssor for the chiller as they’re world famous in this industry. The minimum chilling temperature can go down to -15 degrees Celsius which is more than enough for mixing perfume.

The filtration system of perfume mixing machine includes two pieces of polypropylene microporous membrane filters. The filtration capability is 1 and 0.2 micrometers each.

How does perfume mixer machine with integrated chiller work?
In our standard perfume mixer machine, there’s an air tube with holed branches deep inside the tank. When you apply air into this tube, the air will go out through the holes at the branches and generate a lot of bubbles. In this way, the perfume is mixed by the bubbles. No mechanic devices are needed for mixing perfume.

During the mixing operation, the ingredients (mainly alcohol and water) are pumped out from the bottom valve of the perfume mixing machine by the diaphragm pump. The perfume passes the first and second filters to get it filtered and clarified. Then the perfume goes back to the mixing tank waiting for further filtration.

At the same time, the perfume chiller works and chills the cooling medium inside the evaporating coil down to -5 degrees Celsius. The evaporating coil inside the perfume mixer transfers the chill to the perfume around it. The waste will be resolved and separated from the perfume and filtered during the circulation.

The perfume will then be transferred by the diaphragm pump to the storage tanks after several circualtions with filtration when the chilling temperature is reached.